11
3. Connect the Plasma torch to the
Plasma Torch Central Connector.
6. Connect earth Clamp
to the terminal
1. Install the compressed air hose to the
connector at the rear panel of the machine
to the Compressed Air Inlet.
2. Plug the machine input power lead into
the 15 Amps wall socket, ensuring that
the Mains Power Switch is OFF.
Install the compressed air hose to the
connector at the rear panel of the machine to
the Compressed Air Inlet.
Connect the Plasma torch to the Plasma
Torch Central Connector.
Plug the machine input power lead into the
15 Amps wall socket, ensuring that the Mains
Power Switch is OFF.
Connect the earth lead to the Earth Lead
Connection Socket (positive) and connect
earth clamp to work piece ensuring that the
clamp makes good contact with bare metal.
SET UP P40 Inverter DC Plasma Cutter
1
3
2
4
