Cleaning and Storing
Keep the sensors, solar cell and filter lens clean. Clean filter cartridge and helmet shell by using a
soapy water solution and soft cloth. Do not use solvents or abrasive cleaning detergent. Switch
the product to Grind Mode and put it in a clean, dry location for storage.
8
Front Cover Lens Replacement
Replace the front cover lens if it is damaged (cracked, scratched, pitted or dirty).
• Release and remove the headgear first for easy access to locking pins
• Remove the old front cover lens by pressing two lock switches in the inside of the helmet and slide out.
• Remove the plug front the outside of the helmet,Take the old front cover lens out, and installing the
new one.
Inside Cover Lens Replacement
Replace the inside cover lens if it is damaged (cracked, scratched, pitted or dirty). Place your
finger or thumb into the recess and flex the inside cover lens upwards until it releases from one
edge. Then remove any protective film before installing the new one.
Batteries Replacement
When low voltage indicator (inside the helmet, on the left) turns red,
you have to change battery.
• Release the lens holder by pressing the locking button on the bottom of
the lens inside the helmet, and remove the holder and lens.
• Release the lens by pressing on the lock, Slide the lens upward out of the holder.
• Slide battery cover open and replace the old battery by one new CR 2450.
MAINTENANCE
Press
Press
Slide
Remove plug
Press
Slide Lens upward out of
holder
Press
Slide Battery holder
out of lens and replace
