Videos: BosStrap Features
https://vimeo.com/72150591
10/14 Rev 7
Installation and Fitting
https://vimeo.com/72150592
6. Thread the G3 Tail through the left
camera strap lug from top.
9. Thread the Generation 3 Tail under
the cam lock lever. Allow about 1” of
webbing to go beyond the cam buckle.
When you next open the cam buckle,
pulling on this end will make it easier to
open.
7. Continue threading the G3 Tail
back through the small triglide as
shown in the figure at left.
10. Snap the cam lock closed.
You will hear and feel a secure snap.
Thread the end of the G3 Tail under the
vinyl sleeve
8. Snug up as shown in the Figure at left
leaving about 2” between the camera lug
and the narrow end of the cam
buckle, Lay flat the body strap with the
BosStrap logo facing up. Insert the G3
Tail end from under the metal slide as
shown in Fig 8 .
11. Push the vinyl sleeve on the cam
lock to secure the cam lever. The
sleeve is designed not to completely
cover the closed cam buckle.
Final Adjustments
Now, put on the BosStrap with the camera and lens attached and adjust the BosStrap so that the camera is at a
comfortable location by your right hip and your hand falls naturally on where you grip the camera. After you fine tune the
diagonal BosStrap length, extra slack beyond the buckle can be neatly secured with the included triglide. Small
adjustments to the G3 Tail length and the BosStrap can make big differences in comfort.
When not using the camera, turn it so the lens points down and backward for minimal camera movement when walking.
