WASP™ NEST4 Smart Receiver and Gateway Operations Manual
- 5 -
1. Introduction
1.1 NEST Receiver Introduction
This Operations Manual provides basic information on how to operate the
WASP™Nest Smart Receiver and Gateway.
This manual covers the following topics:
Installation of WASP™NEST
Wiring of WASP™NEST
Configuring of Individual WASP™Sensors
System Information and Settings of WASP™NEST
Maintenance of WASP™NEST
2. Installation
2.1 Included In The Package
The BossPac WASP™ NEST Receiver is shipped with an attachable antenna and required
cables. The BossPac WASP™ sensors, (configurable), are typically shipped alongside.
2.2 Installation
2.2.1 Nest Receiver Installation
The equipment should be installed by a professional or certified technician conversant with the
certification requirements of the installation site.
2.3 Wiring NEST Receiver
2.3.1 Nest Receiver Mounting
The BossPac NEST™ receiver may be installed into existing panels or an enclosure mounted
within 300 meters (1000’) of the WASP™s. Ideal location would have direct line of sight to the
sensors. There are four mounting locations (threaded holes) and an environmental gasket on the
flange of the receiver. A cutout mounting template is also included with the receiver.
2.3.2 Attaching the 915 MHz Antenna
An antenna is provided by BossPac, included, and shipped with the NEST Receiver. The
following optional antennas may be purchased for use with the NEST4S Receiver.
BossPac PN
Gain
EH002058 (Standard)
3 dBi
EH002059
1.2 dBi
EH002060
8 dBi
EH000625
11 dBi
