Bossong boss g40, Руководство пользователя

Страница: 12 / 12

12
5. Declaration of conformity
Gas Concrete Nailer
1. Fastener type and size
• Nail shank : 2.6~3.0mm(0.102”~0.118”)
• Nail length : 15~40 mm(9/16”~1-1/2”)
• Collation type : plastic collation
• Nail strip angle : 0°
• Magazine capacity : 4 nail strips, or 40 nails
2. Tool spec
• Model number : BOSSG40
• Type of tool : Concrete Pin Nailer
• Dimension(LxWxH) : 460 x 116 x 375mm
• Weight of tool : 3..8 Kg(8.4lb)
• Shot limit : 1000 shots/hour
• Drive rate : 2-3shots/sec
• Charge time of battery : 120mins
• Battery voltage : 6 Volt
• Shots per Charge : 4500shots
• Shots per fuel : 1200shots
• Usable temperature : -7°C(19°F)~50°C(120°F)
• Applications & suitability : Dry wall track, steel to concrete job
• Actuating system (safety yoke installed) : full sequential only
• Trigger device : Finger activated trigger.
3. Noise and vibration data
• Noise characteristic values in accordance with EN 12549+A1
• A-weighted sound pressure level at workstation : 97.4 dB
• A-weighted sound power level : 100.8 dB
• Peak C-weighted instantaneous sound pressure level at workstation: < 130dB
• Vibration value according to ISO 8662-11+A1 : 3.67 m/s2
• Measurement uncertainty (Standard) : 1.83 m/s2
Declaration of conformity
We BOSSONG S.p.A.
Via Enrico Fermi, 51 (Z.I. 2)
24050 GRASSOBBIO (Bergamo) Italy
Tel. +39 035 3846 011
declare under our sole Chiodatrice a gas per calcestruzzo BOSS G40
responsibility that the 2006/42/EC (MSD);2006/95/EC (LVD);2004/108/EC (EMC)
conforms with the directive 2011/65/EU (RoHS)
and the standards EN ISO 12100;EN 792-13+A1;EN 12549+A1;ISO 8662-11+A1
EN 60745-1;EN 60745-2-16;EN 55014-1;EN 55014-2+ A2
EN 61000-3-2;EN 61000-3-3;EN 50581
EN 60335-1;EN 60335-2-29;EN 62233
EN 61558-1;EN 61558-2-16
Serial number signed:
Andrea Taddei – Direttore Generale