BOSSVD90/BOSSVD160 User Guide
23
MOTION ZONE
Select Full Zone or Partial Zone for motion sensing.
MOTION SENSITIVITY
Set the motion sensitivity for the specified channel.
Control the motion sensitivity from 1 to 9.
SENSOR
RECORDING
Enable setting up to 4 sensors of 9 sensors for the specified
channel.
PRE RECORD
Enable/disable pre-event recording. Pre-event recording time is 5
second and only intra-frames are recorded for pre-event recording.
POST EVENT
RECORD
Set the post event recording time duration for the specified channel
from 1 to 30 seconds.
SCHEDULE
Set the recording schedule.
3-3-1. Motion Zones
By selecting Partial Zone in the Motion Zone menu, user can set-up the motion sensing zones in
the screen. Move around each rectangular zone using 4 direction key buttons and press SEL
button to include the rectangular region as part of the motion sensing zone. The rectangular
blocks included as part of the motion zone are indicated by changing the color of the blocks.
Figure 3.3.2. Motion Zone selection screen
NOTICE
AUDIO is linked as bellows,
1CH AUDIO = 1CH VIDEO / 2CH AUDIO = 2CH VIDEO
3CH AUDIO = 3CH VIDEO / 4CH AUDIO = 4CH VIDEO
