bossauto SHA56 Скачать руководство пользователя

Страница: 12 / 16

ATTACHING DISC PADS

Disc Pads are specially designed to mate to the Electric Random Orbital Sander.

1. Secure the Spindle with the ﬂat wrench provided with the tool, and screw the Disc pad on.

Tighten to ﬁrm hand-�ghtness. Do not over �ghten.

2. To remove the Disc Pad, insert the ﬂat wrench between the Disc Pad and shroud. Secure the

Spindle with the ﬂat wrench and unscrew the Disc pad.

CLEANING

1. Periodically blow out all air passages and area above Disk Pad and under shroud with dry

compressed air. All plas�c parts should be cleaned with a so� damp cloth. NEVER use solvents

to clean plas�c parts.

2. Wear safety glasses while using compressed air.

-10-

Convenient error resolution and maintain

NORMAL TROUBLESHOOTING

Abnormity

Solu�on

No ﬂash and opera�on a�er start

Excessive vibra�on

Abnormal noise while working

Lever abnormality

Se�ng route program failure. Please reset the program by following reset procedure.

Please stop using the tool. Please check if the spare parts are damaged, or contact

a qualiﬁed repair person.

Please check if the pad is out of shape and need to be changed.

Please check if the plug is inserted successfully or voltage abnormality.

Have your power tool serviced by a qualiﬁed repair person and use only replacement

parts of original manufacturer.

This will ensure that the safety of the power tool is maintained.

Abnormal signal

Abnormity

Solu�on

Motor opera�ng

abnormally

Please turn oﬀ the tool for a while. Restart the tool a�er cooling.

If it is s�ll failure a�er restart, please contact a qualiﬁed repair person.

One long &

one short ﬂash

One long &

two short ﬂash

One long &

three short ﬂash

One long &

four short ﬂash

One long &

ﬁve short ﬂash

One long &

six short ﬂash

One long &

seven short ﬂash

One long &

eight short ﬂash

Motor electric

current abnormity

PCB temperature

abnormity

Motor phase failure

Input low voltage

abnormality

Input high voltage

abnormality

Programs of circuit

board abnormality

Motor temperature

abnormality

Circuit board failure. Please contact a qualiﬁed repair person.

Please check if the voltage is too low.

Please check if the voltage is too high.

Motor failure. Please contact a qualiﬁed repair person.

Please turn oﬀ the tool for a while. Restart the tool a�er cooling.
If it is s�ll failure a�er restart, please contact a qualiﬁed repair

person.Motor failure. Please contact a qualiﬁed repair person.

ABNORMAL SIGNAL TROUBLESHOOTING

It is an abnormity when the LED indicator shows ﬂash “

red and green

” color.

To acknowledge about the abnormity, please follow the instruc�ons below:

Press

＂

—

＂

bu�on hold for ﬁve seconds, the LED indicator shows ﬂash “

red

” color.

Содержание SHA56

















Результаты поиска

Содержание SHA56

Отзывы:

Похожие инструкции для SHA56

Бренды по названию

Популярные бренды

bossauto SHA56, Инструкция по эксплуатации

Результаты поиска

Содержание SHA56

Отзывы:

Похожие инструкции для SHA56

Бренды по названию

Популярные бренды