
6
Panel Descriptions
13
AC IN jack
Connect the included power cord.
* Use only the power cord that was included with the unit.
14
TO SPEAKER OUT A, B jacks
Connect speakers. OUT A and OUT B are connected in parallel.
If you connect to both OUT A and OUT B, ensure that the total
impedance is 4 Ω or higher. For example, if an 8 Ω speaker is
connected to each of the OUT A/B jacks, the total impedance will
be 4 Ω.
* If you don’t need to connect a speaker, it is not a problem to
leave these jacks unconnected.
* For a combo amp with the speaker and amp in a single unit,
disconnect the speaker cable that is connected to the amp,
and connect it to this unit’s TO SPEAKER OUT A or B jack. If the
speaker cable is not long enough to reach this unit, you’ll need
to separately obtain an extension speaker cable.
15
FROM TUBE AMP jack
Connect the tube amp’s speaker output here. You can connect a
tube amp whose output is up to 150 W.
If the tube amp has multiple speaker outputs, connect only this
unit. If a speaker is also connected in addition to this unit, the
tube amp might malfunction.
* Do not connect any equipment other than a tube amp. Doing
so may cause this unit or the connected device to malfunction.
Impedance switch
Set this to match the output impedance of the tube amp
that’s connected. For a 2Ω tube amp, set this to 4 Ω.
* Before changing the setting of the impedance switch,
you must power-off the tube amp.
[INPUT LEVEL] switch
Set this to match the output wattage of the connected tube amp.
If the tube amp’s output wattage is between 10 W, 50 W, and 100
W, for example if it is 20 W, input sound with either the 10 W or the
50 W setting, and use the setting for which the front panel INPUT
SIG/PEAK indicator does not light red.
16
PHONES jack
Connect headphones here.
17
LINE OUT
MONO (FOH) jack
Connect this to the input of the FOH console (PA mixer). This is a
mono output, and the level is fixed. The front panel [LINE OUT]
knob does not affect this.
LINE OUT L/R jack
Connect this to your recording console or powered monitors.
Rear Panel (Connecting the Equipment)
Recorder, etc.
Tube amp
Speaker cabinet
FOH console (PA mixer)
13
16
14
15
17
19
20
22
21
18
GA-FC
Footswitch
Computer
External Effects
External MIDI device
Headphones
Содержание WAZA
Страница 1: ...Owner s Manual WAZATube Amp Expander ...
Страница 13: ...Block Diagram ...