
WATCHES WITH MULTIPLE FUNCTIONS
Multi-eye – Day of the week – Date & moon phase
8
Moon phase
Date hand
Direct-drive
seconds
Day-of-the-week hand
Setting the day
Pull the crown out to 2nd position to stop the seconds hand
on 0 (12 hours).
Rotate the hours/minutes hands
clockwise
to set a day.
To set the day, you need to rotate the hour hand forward
24 hours per day.
NOTE:
If you set the day by rotating the crown counterclockwise,
the date may not change.
Do not set the day by rotating the crown counterclockwise.
The day changes during the period between 0:00 am
and 5:30 am or a bit later.
Setting the time
Having set the day, set the hour and minute hands.
Rotate the hour/minute hands clockwise to set the time.
To ensure correct setting of the time, first rotate the minute
hand 5 minutes ahead of the desired time, then go back
(by rotating counterclockwise) to the desired time.
Having set the time, use a time signal to synchronize the watch
by pushing in the crown to its normal position to start the
direct-drive seconds hand.
NOTE:
Make sure you have correctly set the AM/PM status before
setting the time.
When the day changes, the watch moves to AM status
(ante meridiem).
(The day changes during the period between 0:00 am and
5:30 am or a bit later).
Setting the moon phase
Pull the crown to the 1st position.
Rotate the crown
clockwise
to move the moon phase forward.