Boss TurboStart BR-800 Скачать руководство пользователя страница 72

Страница: 72 / 168

Using Insert Effects

*1 Setting available when TYPE is set to FLIP TOP, B MAN,

CONCERT 810, T.E., or SESSION.

*2 Setting available when TYPE is set to SUPER FLAT or AC

BASS.

*3 Setting available when TYPE is set to FLIP TOP,

CONCERT 810, or BASS 360.

*4 Setting available when TYPE is set to B MAN.

*5 Setting available when TYPE is set to CONCERT 810.

*6 Setting available when TYPE is set to T.E.

*7 Setting available when TYPE is set to SESSION.

BRIGHT *3

Turns the bright setting on/off.

OFF

Bright is not used.

Bright is switched on to create a lighter and
crisper tone.

DEEP *4

OFF, ON

This switch changes the character of the
lower range.

ULTRA LO *5

-, 0, +

This controls the character of the lower
range.

ULTRA HI *5

OFF, ON

This controls the ultra high-frequency
range lying beyond treble.

PRE SHAPE *6

OFF, 1, 2

This is a shape switch that adds a particular
nuance to the midrange.

ENHANCER *7

0–100

This controls the clarity and presence of the
sound.

RESPONSE *1

BASS, FLAT

This controls the overall amp characteris-
tics. Select the position corresponding to
the characteristics for one of the two types
of sound.

SP TYPE (Speaker Type)

Select the speaker type.

OFF

This turns off the speaker simulator.

ORIGINAL

This is the built-in speaker of the amp you
selected with PREAMP TYPE.

1x15”

This is a compact open-back speaker cabi-
net with one 15-inch speaker.

1x18”

This is a compact open-back speaker cabi-
net with one 18-inch speaker.

2x15”

This is a general open-back speaker cabinet
with two 15-inch speakers.

4x10”

This is an optimal speaker cabinet for a
large enclosed amp with four 10-inch
speakers.

8x10”

This is a double stack of two cabinets, each
with four 10-inch speakers.

MIC POS (Mic Position)

This simulates the microphone position.

CENTER

Simulates the condition that the micro-
phone is set in the middle of the speaker
cone.

Parameter/
Range

Explanation

1–10

Simulates the condition that the micro-
phone is moved away from the center of
the speaker cone.

MIC LEV (Mic Level)

0–100

Adjusts the volume of the microphone.

D.LEVEL (Direct Level)

0–100

Adjusts the volume of the direct sound.

Parameter/
Range

Explanation

BR800_e.book 72 ページ２０１１年６月６日　月曜日　午後２時１４分

Содержание TurboStart BR-800









































































































































































Результаты поиска

Содержание TurboStart BR-800

Отзывы:

Boss TurboStart BR-800, Руководство пользователя, Страница: 72 / 168

Результаты поиска

Содержание TurboStart BR-800

Отзывы: