10
3
4
5
7
6
1.
When you have made the necessary connections
(p. 6), set the knobs as shown in the illustration.
2.
Depress the pedal switch to turn the effect on.
(Make sure that the CHECK indicator lights.)
3.
Select the mode with the MODE knob.
4.
Set the DECAY/RATE knob to your taste, depending
on the selected mode.
When MODE is 1, 2, 4, 5, 7–11
Use the knob as a decay knob to set the time for the frequency
of the filter to move.
When MODE is 3, 6
Use the knob as a rate knob to adjust the speed at which the
filter fluctuates.
5.
Adjust the frequency of the filter using the FREQ
knob.
6.
Adjust the feedback amount of the filter using the
RES knob.
7.
Adjust the volume of the effect and direct sounds
using the EFFECT Level and DIRECT Level knobs.
Operating the Unit
