Editing a Patch
15
Saving the Edited INST Settings
(VARIATION)
Your preferred settings for each instrument can be saved as a
“VARIATION.” Since a variation can also be used from another patch, it
is convenient for sound design.
Here we explain using the example of the DYNAMIC SYNTH screen of
INST1.
1 .
In the INST screen, press the [1] knob.
The VARIATION screen appears.
MEMO
From the INST edit screen, you can also access the variation screen
using the following methods.
1 .
In the edit screen, select the “COMMON” block.
2 .
Use the [
J
] (PAGE) button to move to the last page.
3 .
Press the [5] knob.
2 .
Press the [2] knob.
The VARIATION WRITE screen appears.
3 .
Turn the [1] knob to select the save-destination
number.
4 .
Use the [3]–[6] knobs to specify the variation name.
5 .
Press the [WRITE] button.
The variation is saved.
To cancel this procedure, press the [4] knob.
Recalling a Saved INST Variation
1 .
In the INST screen, press any one of the knobs [1]
(INST1), [3] (INST2), or [5] (INST3).
The VARIATION screen appears.
2 .
Turn the [6] knob to select a variation.
You can also audition the sound while selecting a variation.
3 .
Press the [5] knob to recall the selected variation.
