Boss Snowrator MAG, Руководство пользователя

Страница: 12 / 16

Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 2 hours
• Tighten all hardware.
Before each use or daily
• Check the hydraulic cylinders.
• Check the hydraulic lines and hoses.
• Check all fasteners, pins, retainers, nuts, and bolts.
• Check the cutting edge for wear.
• Oil the chain.
Every 50 hours
• Grease the attachment.
Every 100 hours
• Check the chain tension.
Before storage
• Lightly sand and use touch-up paint on painted areas that are scratched, chipped,
or rusted.
• Oil the chain.
• Grease the hydraulic cylinder rods.
• Lightly sand and use touch-up paint on painted areas that are scratched, chipped,
or rusted.
Maintenance
•
Check the hydraulic lines and hoses daily for
leaks, kinked lines, loose mounting supports, wear,
loose fittings, weather deterioration, and chemical
deterioration. Make all necessary repairs before
operating.
•
Check the hydraulic cylinders daily for leaks, rust,
or pitting on the rods. Make all necessary repairs
before operating.
•
Check the cutting edge daily for wear. Replace the
cutting edge if it is worn down.
•
Check all fasteners, pins, retainers, nuts, and bolts
daily to ensure that they are secure. Torque them
to the appropriate value if they are loose.
Checking the Chain Tension
Service Interval: Every 100 hours
1. Remove the chain guard.
2. Loosen the 4 motor bolts.
g386209
Figure 19
3. Pull back the motor and hold in place.
4. Tighten the 4 bolts.
5. Install the guard.
Oiling the Chain
Service Interval: Before each use or daily
Before storage
Use Boss Snowrator Hydraulic Fluid or SAE 20 oil.
1. Raise the attachment all the way up using the
hydraulic controls.
2. Remove the rubber plug on the chain housing
and insert it into the housing with the cup side
up.
12