7
Bank Settings
CTL
Assigning the Function of an External Controller
Here’s how to assign the function of an external pedal (expression pedal, footswitch) that’s connected to the RC-202. You can also assign a control
change message from an external MIDI device (such as the FC-300).
1
Select the bank for which you want to make assignments.
2
Press the [SETUP] (EXIT) button.
3
Press the [RING MOD] (CTL) button.
Controller settings (CTL Source)
4
Press the [VALUE] knob to select the controller that you want to assign.
Value
Explanation
CT1
The footswitch (CTL 1) connected to the CTL 1, 2/EXP jack (CTL target default setting: 11)
CT2
The footswitch (CTL 2) connected to the CTL 1, 2/EXP jack (CTL target default setting: 23)
EXP
The expression pedal connected to the CTL 1, 2/EXP jack (CTL target default setting: 19)
C80
Control change message (80) from an external MIDI device
C81
Control change message (81) from an external MIDI device
C82
Control change message (82) from an external MIDI device
C83
Control change message (83) from an external MIDI device
C84
Control change message (84) from an external MIDI device
Specify control target (CTL Target)
5
Turn the [VALUE] knob to select the assignment target.
Value
Explanation
OFF
No assignment target is specified.
1
Switches track 1 between record/play.
2
Switches track 2 between record/play.
3
Switches track 1 between play/stop.
4
Switches track 2 between play/stop.
5
Clears track 1.
6
Clears track 2.
7
Executes undo/redo for track 1.
8
Executes undo/redo for track 2.
9
Adjusts the volume (playback level) of track 1.
10
Adjusts the volume (playback level) of track 2.
11
Switches between record/play for the track that’s specified as the target track (p. 6).
12
Stops the track that’s specified as the target track (p. 6).
13
Clears the track that’s specified as the target track (p. 6).
14
Executes undo/redo for the track that’s specified as the target track (p. 6).
15
Adjusts the volume of the track that’s specified as the target track (p. 6).
16
Allows you to simultaneously play/stop all tracks.
17
Executes undo/redo.
18
Plays/stops the rhythm.
19
Adjusts the volume of the rhythm.
20
Lets you set the tempo by pressing the footswitch at the desired interval (tap tempo).
21
Adjusts the volume of the master compressor.
22
Adjusts the volume of the master reverb.
23
Switches the target track (p. 6).
24
Switches to the next phrase memory.
25
Switches to the previous phrase memory.
26
Adjusts the input volume of the INPUT jacks.
27
Adjusts the output volume of the OUTPUT jacks.
28
Adjusts the volume of the headphones.
29
Adjusts the volume of track 1 in the range of 0–playback level.
30
Adjusts the volume of track 2 in the range of 0–playback level.
31
Adjusts the volume balance of tracks 1 and 2.
32
Controls the parameter that is assigned to the [INPUT FX] knob.
33
Controls the parameter that is assigned to the [TRACK FX] knob.
34
Switches to the next memory within the bank.
35
Switches to the previous memory within the bank.
6
Press the [SETUP] (EXIT) button to return to the Play screen.
