6
Bank Settings
LOOP
Parameter
Value
Explanation
ACT
Changing the Record
0
Overdub
0
Playback Switching Order (REC Action)
When you press the [
p
/
t
] button, the operation is switched in the order of record
0
playback
0
overdub, but you can change this so that the
switching order is record
0
overdub
0
playback.
* If you are using reverse playback, and you specify record
0
overdub
0
playback, the switching order changes to record
0
playback
0
overdub.
r-d
Operation will switch in the order of Recording
0
Overdub
0
Playback.
r-p
(default)
Operation will switch in the order of Recording
0
Playback
0
Overdub.
QUA
Automatically Correcting the Timing of a Button Press (Play Quantize)
Your timing will be corrected (Loop Quantize) based on the tempo and time signature of the
rhythm, even if the timing at which you press a button is slightly inaccurate.
5
If rhythm is on
5
If the MIDI Sync is on
REC
(default)
Quantize to the measure start location only for recording.
MSR
Quantize to the measure start location for recording/overdubbing/playback.
BET
Quantize to the measure start location for recording.
Quantize to the beat location for overdubbing and for playback.
TGT
Specifying the Track Operated by an External Controller (Target Track)
This specifies the track (track 1, 2) that is operated if CTL target (p. 7) is set to “11–15.”
MEMO
You can switch the target track by pressing the [TRACK] button of track 1 or 2 twice in succession in the play screen.
FDI
Playing Back with a Fade-In (Fade In)
When playing back track, you can choose whether to start playback with a fade-in or have playback start immediately.
OFF
(default)
Playback starts immediately.
ON
Playback starts with a fade-in.
FDO
Stopping with a Fade-Out (Fade Out)
When stopping a track, you can choose whether to stop with a fade-out or to stop immediately.
OFF
(default)
Playback will stop immediately.
ON
Playback will fade out and then stop.
FDT
Adjusting the Time Used to Fade In/Out (Fade Time)
This specifies the fade-in/out time when fade-in/out is turned “ON.”
1–64 (MEAS) (default: 2)
This is the fade-in/out time. This is specified in units of measures.
Start
Stop
Recorded phrase
