Boss Mig 250, Руководство по эксплуатации

Страница: 13 / 30

- 11 -
BOSS Inverter Mig 250 Operating Manual
3.0 OPERATOR CONTROLS
3.01 Inverter Mig 250 controls
Figure 2
1. Main Circuit Bleaker— Switching to the ON position energizes the welding power source.
2. Selector Control— 2T/ Spot/ 4T
3. Spot Time
4. 14-Pin Receptacle— Used to connect the wire feeder.
5. Wire Feed Speed Control.
6. Voltage Control.
7. Positive Terminal— 50mm Screw receptacle.
8. Negative Terminal— 50mm Screw receptacle.
9. Terminal— Use to connect the torch.
10. Down Slope Voltage Control (Optional).
11. Down Slope Amperage Control (Optional).
12. Meter Selection.
13. Inductance Control (Inside).
14. Digital Meter.
15. Warning Indicator— Activates under the following conditions:
•
Input voltage is too low/ too high
•
Thermal overload
16. AC Power Indicator— Lights when in the ON position.
17. Ground.
18. Input Power Cable Port.
19. 110VAC Auxiliary Power.
20. Fuse.
21. Input Gas Fitting.
22. Burnback (Inside).