Boss MICRO BR Скачать руководство пользователя страница 90

Страница: 90 / 140

Section 4. Using rhythm

Here’s how to select a desired arrangement and
play it.

Press [RHYTHM].

The rhythm screen appears.

Press [TR2] to make the display indicate
“AR:” (Arrangement mode).

The display will indicate “AR:”. Each time
you press the button, the indication will
alternate between “PT:” and “AR:”.

fig.Disp-ar-P01.eps

Press [TR1] to turn on the rhythm.

Press [TR1] to make the “RHYTHM”
indication appear. Rhythm will be on. Each
time you press the button, the “RHYTHM”
indication will light or go dark.

Use VALUE [-] [+] to select the number of
the song arrangement (S01–S05) that you
want to create.

fig.Disp-ar-S01.eps

Press [EXIT] to return to the Play screen.

Press .

The recorder begins its playback, and the
arrangement also starts playing.

* With the factory settings, each song arrangement (S01–

S05) contains only P314 4/4 Metro.

You can temporarily change the tempo of the
arrangement in the same way as described in
“Changing the tempo of the pattern” (p. 85).

If you want to slightly modify a preset arrangement to
your liking, or if you want to create a variation of an
existing arrangement, you can copy that arrangement
to a song arrangement and then edit it freely.

Perform steps 1 through 6 of “Specifying
the pattern for the first measure” (p. 86),
to select the song arrange you want to
copy.

Press [TR3] (CPY).

Use VALUE [-] [+] to select the copy-
destination arrangement number.

Press [TR4] (EXE).

The message Copy S**

→

S** OK? will appear.

* “**” stands for the copy-source and copy-destination

arrangement number.

Press [TR4] (YES).

The arrangement will be copied to the
destination.

* You can’t copy to a preset arrangement.

This operation will erase arranging steps-2 and
following of the currently selected song arrangement.

Arranging step-1 will remain without being
erased, and will be set to “Metro” (metronome).

Perform steps 1 through 6 of “Specifying
the pattern for the first measure” (p. 86),
to select the song arrange you want to
erase.

Press [TR4] (ERS).

The message Erase S** OK? will appear.

* “**” stands for the arrangement number to be erased.

Press [TR4] (YES).

The arrangement will be erased.

* You can’t erase a preset arrangement.

Playing an arrangement

Changing the tempo of the

arrangement

Copying/erasing an
arrangement

Copying

Erasing

MICRO-BR_e.book 90 ページ２００７年１２月６日　木曜日　午後４時８分

Содержание MICRO BR













































































































































Результаты поиска

Содержание MICRO BR

Отзывы:

Похожие инструкции для MICRO BR

Бренды по названию

Популярные бренды

Boss MICRO BR, Руководство пользователя

Результаты поиска

Содержание MICRO BR

Отзывы:

Похожие инструкции для MICRO BR

Бренды по названию

Популярные бренды