2
Panel Descriptions
Top Panel
1
2
3
4
8
10
5
6
7
9
11
1
AMPLIFIER
[AMP TYPE] knob
Selects the amp type. All provided amp types are original.
Type
Explanation
BROWN
A lead sound with an edge inherited from the
BOSS WAZA brown sound.
LEAD
Different gain settings allow this sound to cover
a wide range from crunch to high-gain.
CRUNCH
A fat crunch sound that faithfully responds to
the nuances of your picking.
CLEAN
A clean and natural sound. In conjunction with
BST (BOOSTER), it can be used for solo or lead.
ACOUSTIC
A dedicated acoustic guitar amp that supports
connection of an acoustic guitar.
[GAIN] knob
Adjusts the gain (amount of distortion).
[VOLUME] knob
Adjusts the volume.
2
EQUALIZER
[BASS] knob
Adjusts the sound level of the low-frequency range.
[MIDDLE] knob
Adjusts the sound level of middle-frequency range.
[TREBLE] knob
Adjusts the sound level of the high-frequency range.
3
EFFECTS
Here you can make settings for the built-in effects. For details on
the effect types and settings for each knob, refer to “Using the
Effects” (p. 6).
[BST/MOD] button/knob
Controls distortion-type effects and modulation effects.
[DELAY/FX] button/knob
Controls effects such as delay, wah, tremolo, and octave.
[TAP] button
Sets the delay time. When you press this button two or more
times, the delay time is set to the interval between presses.
[REVERB] button/knob
Controls the reverb.
4
[MASTER] knob
Adjusts the overall volume.
5
[Bluetooth] button/indicator
Registers a Bluetooth Device (p. 8). And indicates the Bluetooth
connection status.
Indicator
Explanation
Lit
Connected
Blinking
Pairing mode
Unlit
Not connected
6
[
L
] (POWER) button/indicator
Turn the power on/off. This also indicates the state of the power
supply.
Indicator
Explanation
Lit green
On
To enter standby mode, long-press the
[
L
] button.
To turn the unit off, enter standby mode
and then long-press the [
L
] button.
Lit orange
Standby mode
To turn the unit on, press the [
L
] button.
To turn the unit off, long-press the [
L
]
button.
Unlit
Off
