6
Panel Descriptions
13
AC IN jack
Connect the included power cord.
* Use only the power cord that was included with the unit.
14
SPEAKER OUT jack
HEAD, Artist, Artist HEAD only
Connect a speaker box. Only use speaker cable to connect the
speaker. Do not use any shielded cable designed for use with
guitars.
When connecting an external speaker
HEAD
5
If a plug is inserted in this jack, no sound will be output from the
KATANA MkII’s own speaker.
5
You must use a speaker box that has an input impedance of 8Ω
or higher.
Artist, Artist HEAD
5
When the unit is shipped from the factory, the internal speaker
is connected to the 8Ω jack. If a plug is connected to the 8Ω jack,
sound is not output from the 16Ω (A/B) jacks. If you want to use
an external speaker, disconnect the internal speaker’s plug from
the 8Ω jack.
5
If you use the 8Ω jack, you must use a speaker box whose input
impedance is 8Ω or higher.
5
If you use the 16Ω (A/B) jacks, you must use speaker boxes whose
input impedance is 16Ω or higher.
15
EFFECT LOOP SEND/RETURN jacks
100, 100/212, HEAD, Artist, Artist HEAD only
Connect an external effect device (mono).
Connect the SEND jack to the input of your external effect device,
and connect the output of your external effect device to the
RETURN jack.
16
[STEREO EXPAND] switch
100, 100/212, HEAD only
Two KATANA MkII units can be connected for stereo output.
Stereo connection method
Amp 1
Amp 2
1.
From the LINE OUT jack of the amp 1 to which your guitar
is connected, connect to the POWER AMP IN jack of the
amp 2.
2.
Turn “ON” the [STEREO EXPAND] switch of both amps.
* The controls of the amp 2 other than the [MASTER] knob and the
[POWER CONTROL] switch do not function.
Rear Panel
KATANA-50 MkII, KATANA-50 MkII EX
KATANA-100 MkII, KATANA-100/212 MkII
KATANA-HEAD MkII
* The illustration shows the KATANA-HEAD MkII. The KATANA-100 MkII
and KATANA-100/212 MkII do not have MIDI IN jack and SPEAKER
OUT jacks.
* The illustration shows the KATANA-50 MkII EX. The KATANA-50 MkII
does not have LINE OUT jack and GA-FC jack.
13
* The illustration shows the KATANA-Artist MkII HEAD. The KATANA-Artist MkII does not
have AIR FEEL [TYPE] switch and [CUSTOM SETTING] switch.
KATANA-Artist MkII, KATANA-Artist MkII HEAD
18
20
19
21
23
14
16 17
15
22
20
17
21
18
23
22
20
19
21
23
25
22
14
17
15
24
18
