manualshive.com logo in svg

Boss DD-500, Руководство пользователя, Страница: 12 / 26

Поделиться
Скачать
Boss DD-500 Скачать руководство пользователя страница 12

12

Parameter List

PATCH

Parameter

Explanation

MODE

Selects the type of delay (p. 5). The same function as the [MODE] knob.

TIME

Specifies the delay time. The same function as the [TIME/VALUE] knob.

BPM

Specifies the tempo.

NOTE

Specifies the delay time with the note length relative to BPM.

FEEDBACK

Adjusts the feedback level (or how much the sound is repeated). Higher settings will result in more delay 

repeats. The same function as the [FEEDBACK] knob.

TONE

Adjusts the tone of the delay sound. The same function as the [TONE] knob.

EFFECT LEVEL

Adjusts the volume of the delay sound. The same function as the [E. LEVEL] knob.

MOD DEPTH

Adjusts the modulation depth of the delay sound. The same function as the [MOD DEPTH] knob.

MOD RATE

Adjusts the modulation rate of the delay sound.

CARRY OVER

You can specify whether the effect sound is carried-over when you switch patches or turn the delay off.

DIRECT LEVEL

Adjusts the volume of the direct sound when the effect is on.

EQ SW

Turns the EQ on/off.

EQ LO.CUT

Sets the frequency at which the low cut filter begins to take effect. 
When “FLAT” is selected, the low cut filter will have no effect.

EQ LO.GAIN

Adjusts the low frequency range tone.

EQ LM.GAIN

Adjusts the low-middle frequency range tone.

EQ LM.FREQ

Specifies the center of the frequency range that will be adjusted by the LM.GAIN.

EQ LM.Q

Adjusts the width of the area affected by the EQ centered at the LM.FREQ. Higher values will narrow the area.

EQ HM.GAIN

Adjusts the high-middle frequency range tone.

EQ HM.FREQ

Specifies the center of the frequency range that will be adjusted by the HM.GAIN.

EQ HM.Q

Adjusts the width of the area affected by the EQ centered at the HM.FREQ. Higher values will narrow the area.

EQ HI.GAIN

Adjusts the high frequency range tone.

EQ HI.CUT

Sets the frequency at which the high cut filter begins to take effect. 
When “FLAT” is selected, the high cut filter will have no effect.

EQ LEVEL

Adjusts the overall volume level of the equalizer.

LO DAMP

Adjusts the amount by which the low frequency range is reduced each time the effect sound is repeated.

LO DAMP F

Specifies the frequency of the low range that is reduced by LO DAMP.

HI DAMP

Adjusts the amount by which the high frequency range is reduced each time the effect sound is repeated.

HI DAMP F

Specifies the frequency of the high range that is reduced by HI DAMP.

DUCK SENS

Adjusts the sensitivity at which the volume is automatically adjusted according to the input. Higher values 

allow the adjustment to occur in response to lower volumes.

DUCK PRE DEPTH

The volume being “input” to the delay is automatically reduced when the input sound is loud. The amount of 

reduction increases as this setting approaches 100.

DUCK POST DEPTH

The volume being “output” to the delay is automatically reduced when the input sound is loud. The amount 

of reduction increases as this setting approaches 100.

EFFECT PAN

Adjusts the stereo position of the effect sound.

DIRECT PAN

Adjusts the stereo position of the direct sound.

Содержание DD-500



























Отзывы:

Нет отзывов