5
Basic Operation
Adjusting the Delay
[MODE] knob
Selects the type of delay.
STANDARD
Clear digital delay.
TERA ECHO
Spacious echo sound with movement, neither reverb nor delay.
SLOW ATTACK
Delay with a suppressed attack as if the volume is being faded-in.
FILTER
Delay with a swept filter added.
SHIMMER
Delay with pitch-shifted sound mixed in.
SFX
Delay with a sound-effect character.
REVERSE
Produces an effect where the sound is played back in reverse.
PATTERN
Sixteen independently-settable delays.
DUAL
A delay comprising two different delays connected either in series or in parallel.
VINTAGE DIGITAL
Vintage digital delay with the warmth of an early unit.
TAPE
Provides the characteristic wavering sound of the tape echo.
ANALOG
Gives a mild analog delay sound.
[TONE] knob
Adjusts the tone of the effect’s sound.
The frequency response is flat when
the knob is set to the center position;
turning it to the right boosts the higher
frequencies, and turning it to the left
cuts the higher frequencies.
[TIME/VALUE] knob
Adjusts the delay time.
To make larger changes in the value,
turn the knob while pressing it.
[E. LEVEL] knob
Adjusts the volume of the effect sound.
[TAP/CTL] switch
You can easily set the delay
time to match the tempo
of the song being played
by pressing the pedal
in time with the song’s
tempo (Tap Input).
If you like, you can assign
this switch to a different
function (p. 8).
[
I
] [
H
] buttons
Switch screens.
[
H
]
[
I
]
[
H
]
[
I
]
[
H
]
[
I
]
Tempo
Delay time
Note length relative to the tempo
[
H
]
[
I
]
Delay time
Delay time
Top screen
Turn the [TIME/VALUE] knob to adjust
the value.
[MOD DEPTH] knob
Adjusts the modulation depth of the
delay sound.
[FEEDBACK] knob
Adjusts the feedback level (or how
much the sound is repeated).
* Oscillation may occur with certain
input sounds, or when the knob is
set at certain positions.
[A] [B] switches
Switch banks/patches (p. 7).