Boss DD-500, Руководство пользователя, Страница: 17 / 26

17
Parameter List
SYSTEM
Parameter Explanation
CONTRAST Adjusting the contrast of the display
OUTPUT Selects how output occurs.
BANK MODE Specifies the timing at which the patch is changed when you change banks.
BANK EXTENT MIN Sets the lower limit for the banks.
BANK EXTENT MAX
Sets the upper limit for the banks.
KNOB LOCK Specifies whether knob operations will be disabled.
KNOB MODE Specifies how knob operations occur.
BYPASS Specifies how the bypass sound is output.
PEDAL ACT
Specifies whether the operation occurs when you press the [A], [B], or [TAP/CTL] switch or when you release
the switch.
FSW HOLD TIME
Specifies the number of seconds of holding down the [A], [B], or [TAP/CTL] switch that is interpreted as a
long-press.
FSW MODE Specifies how the footswitch is used (p. 19).
USB MODE
Specifies the USB operating mode (p. 21).
LOOP MODE Specifies the sampling frequency.
MIDI
Parameter Explanation
Rx CHANNEL Specifies the receive channel.
Tx CHANNEL Specifies the transmit channel.
PC IN
Specifies whether program changes are received.
PC OUT Specifies whether program changes are transmitted.
CC IN Specifies whether control changes are received.
CC OUT Specifies whether control changes are transmitted.
TIME CONTROL Specifies whether operations of the [TIME/VALUE] knob are transmitted and received.
A SW CC
[A] switch
Specifies the controller number of the corresponding knobs or switches.
B SW CC [B] switch
TAP/CTL SW CC [TAP/CTL] switch
FEEDBACK CC [FEEDBACK] knob
E. LEVEL CC
[E. LEVEL] knob
TONE CC [TONE] knob
MOD DEPTH CC [MOD DEPTH] knob
CTL1 CC External CTL1 switch
CTL2 CC External CTL2 switch
EXP CC
External EXP pedal
EFFECT ON/OFF CC Specifies the controller number that switches between delay-on and bypass.
LOOP ON/OFF CC Specifies the controller number that switches the phrase loop function on/off.
LOOP REC/DUB CC
Specifies the controller number that executes recording or overdubbing when using the phrase loop
function.
LOOP PLAY CC Specifies the controller number that executes loop playback when using the phrase loop function.
LOOP STOP CC Specifies the controller number that stops playback when using the phrase loop function.
LOOP CLEAR CC Specifies the controller number that clears the phrase when using the phrase loop function.
SYNC Selects the tempo clock input that is used for synchronization.
REALTIME SRC
Selects the source of the realtime messages that are transmitted from the MIDI OUT connector or the USB
port.
MIDI IN->OUT Specifies the connector to which MIDI messages received from the MIDI IN connector are output.
USB IN->OUT Specifies the connector to which MIDI messages received from the USB port are output.
DEVICE ID Sets the MIDI Device ID used for transmitting and receiving System Exclusive messages.