Boss BR-864 Скачать руководство пользователя страница 170

Страница: 170 / 200

170

Loading drum sounds from WAV/AIFF files

You can import WAV and AIFF files on your computer and
load these as drum sounds (TONE LOAD).

●

Wave data in the following formats can be imported.

You cannot import wave data in other formats.

• WAV or AIFF format

• Mono or Stereo

• 8-bit or 16-bit

• Sampling Rate: 44.1 kHz

●

Add the extension “WAV” to imported WAV files and

the extension “AIF” to imported AIFF files.

●

Compressed WAV files or AIFF files cannot be loaded.

●

Extremely short waveform data (less than

approximately 100 msec) cannot be loaded.

●

The loop point settings within an AIFF file will be

ignored.

●

File names containing more than eight characters will

not be displayed correctly.

●

You can load drum sounds of up to 13 seconds for a

single drum kit.

(Example)

Kick: 3 seconds, snare: 3 seconds,

crash cymbal: 7 seconds

→

Total 13 seconds

●

Stereo WAV and AIFF files are loaded as “mono”

sounds with the left and right sides mixed.

With Windows

Connect your computer and the BR-864 with a USB
cable.

Confirm that the recorder is stopped, then press [USB].

The USB function select screen appears.

Select “BACKUP” with the TIME/VALUE dial, then
press [ENTER].

The Idling screen appears in the display.

fig.03-513d

* You cannot carry out the following procedure unless the Idling

screen is displayed. Refer to p. 182 for instructions on
resolving this problem.

The “BOSS_BR-864” (or “Removable Disk (*:)”) icon is
added to the computer.

fig.06-104

Import the WAV or AIFF file.

Click the “BOSS_BR-864” (or “Removable Disk

(*:)”) icon.

Drag the imported WAV or AIFF file to the

“TONELOAD” folder.

fig.03-514d

When you have finished importing the WAV or AIFF
files, the Idling screen returns to the display.

Quit the connection to the computer.

In My Computer, right-click on the “BOSS_BR-864”

icon (or “Removable Disk (*:)” icon) to “Eject” the disk.

BOSS_BR-864

(Ex.)

Removable Disk (*:)

Содержание BR-864









































































































































































































Результаты поиска

Содержание BR-864

Отзывы:

Boss BR-864, Руководство пользователя, Страница: 170 / 200

Результаты поиска

Содержание BR-864

Отзывы: