3. Installing Guide Bar and Saw Chain
A standard saw unit package contains the items as illustrated
Bar protector
(optional)
Power
unit
Guide
bar
Saw
chain
Open the box and install the guide bar and the saw chain on the power unit as
follows:
The saw chain has very sharp edges.Use thick protective gloves for satety
1. Pull the guard towards the front handle to check that the chain
brake is not engaged.
2. Loosen the nuts and remove the chain cover.
3. Fix the hanger on the rear of power unit by screw.
4.Mount the guide bar then fit the saw chain around the bar and sprocket.
Note:Pay attention to the correct direction of the saw chain.
5.Fit the chain tensioner nut into the lower hole of the guide bar, then
install the chain cover,and Fasten the mounting nut to finger tightness.
Plug wrench
Screwdriver for
Carburetor adjustment
Hole
Ch
ain tensioner nut
Chain cover
Moving direction
