3
16
SPECIFICATION
Power requirement................................................................DC 12V.
Current consumption..........................................................10A MAX.
POWER OUTPUT...............................4 X 80W(Measured at 14.4V).
Frequency range...............................................87.5MHz -107.9MHz
Usable sensitivity.........................................................................3uV.
I.F Frequency.......................................................................10.7MHz.
Frequency range.................................................530KHz - 1710KHz
I.F Frequency........................................................................450KHz
Usable Sensitivity.......................................................................40dB
Output........................................................................ MAX 1200mv
System.................................................................MP3 audio system.
Frequency characteristics......................................20-100Hz
5dB
10-20KHz
5dB.
Signal to noise ..............................................................50dB [1KHz]
GENERAL
FM SECTION
AM SECTION
LINE - OUT
CD/USB PLAYBACK
Number of channels.........................................................2 STEREO.
Chassis dimensions...................................178[W] X 50[H] X 165[D].
Usable disc.........................................CD/CD-R/CD-RW/MP3/WMA
BASIC OPERATION:
1. To turn on/off the unit
2. To select playback mode
3. To adjust the volume level
4. To mute or resume the sound
5. To turn on/off LOUD mode
6. To display and adjust the clock time
7. To select and adjust the mode of the sound and menu
Press any button except the EJECT and REL button to turn on the unit. It also can
turn on the unit to insert disc or USB. Press the power button and hold for more than
0.5 seconds to turn off the unit.
Press MODE button to select a different mode of operation as indicated on the display
panel. Available modes include Tuner, CDP, USB and AUX.
To increase the volume, rotate the volume knob clockwise. To decrease the volume,
Rotate the volume knob counter clockwise. When the volume is adjusted, the volume
level will be shown on the display panel as a number ranging from 0 (lowest) to
46 (highest).
Press MUTE button momentarily to mute the audio volume, and MUTE will flash in the
display. Press the mute button again to restore volume to the previous setting.
To resume the sound immediately, can also press one of the MODE,
BAND, SEL button or rotate the VOL knob.
Press the LOUD button to turn on/off LOUD mode.
When turning on the LOUD mode, it will enhance bass level immediately when the
bass is not enough.
A) Time display
Press the CLOCK button shortly to display time for 5 seconds, and then it returns
to its previous display unless the button is pressed again.
B) Time adjustment
From the clock mode, press the CLOCK button and hold for more than 1 seconds to
flash time and then rotate the VOL knob clockwise to adjust minute, rotate the VOL
knob counter clockwise to adjust hour.
A) To select and adjust the sound mode:
Press SEL button briefly and repeatedly to select the mode of VOL(volume),BAS
(BASS)(without preset DSP), TRE(treble)(without preset DSP), BAL(balance) and
FAD(FADER) in the sequence and circulation. In each mode, the waiting time is
about 5 seconds, and when the waiting time is over, it will return to the the last
display mode. After select a desired sound item, rotate the VOL knob on the front
panel or press the + or - button on the remote controller to adjust level of the
selected sound item.
Содержание 745BA
Страница 1: ......