Installing the Spreader
Controller
Mount the controller in the cab where it does not
interfere with vehicle operation or visibility.
Important:
Do not mount the controller in a
location that vehicle occupants could contact it
during a crash.
1.
Remove the mounting bracket from the controller
(
).
g031015
Figure 5
1.
Mounting bracket bolt
3.
Sheet-metal screw
2.
Mounting bracket
2.
Attach the mounting bracket to the vehicle using
2 sheet-metal screws (
).
3.
Attach the controller to the mounting bracket
with the previously removed bolts.
Note:
Position the controller screen so that it is
clearly visible to the driver.
4.
Connect the wire harness controller connector
to the controller.
6
