Form No. MSC11520 Rev A
Wiring Upgrade Kit
1.5 CuFt Drop Spreader
Part No. SNR24040
Owner's Manual
Setup
Note:
Apply dielectric grease to all electrical
connections.
Determine the left and right sides of the machine from
the normal operating position.
1.
Park the machine on a level surface and lower
all attachments.
2.
Set the parking brake, shut off the engine, wait
for all moving parts to stop, and remove the key.
3.
Disconnect the negative (–) cable from the
battery.
4.
Remove the knockout panel on the control
panel.
g395838
Figure 1
Snowrator
g395816
Figure 2
Snowrator MAG
5.
Install the switch.
g382857
Figure 3
Snowrator
© 2022—BOSS Products
P.O. Box 787
Iron Mountain, MI 49801
Register at www.bossplow.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*MSC11520*
