Setup
Installing the Mounting
Plates
g383799
Figure 3
g382858
Figure 4
Installation location options
1.
Secure the lower mounting plates to the machine
using 2 bolts (5/16-18 x 1 inch) and 2 nuts
(5/16-18 inch).
Important:
Ensure that the mounting bar is
below the hardware slots when installing the
mounting plates.
•
Use both brackets for the Snowrator.
•
Use the outer bracket only for the Snowrator
MAG.
g382862
Figure 5
Snowrator
g387680
Figure 6
Snowrator MAG
2.
Install the upper mounting bracket using 2 bolts
(5/16-18 x 1 inch) and 2 nuts (5/16-18 inch).
g382867
Figure 7
3.
Torque the fasteners to 15 N∙m (11 ft-lb).
5
