BOSS Products limited consumer warranty and BOSS
Products commercial warranty policies are located at
www.bossplow.com
.
Patents
www.ttcopats.com
.
Introduction
Note:
This plow attaches to the Snowrator MAG.
The straight-blade plow is intended to be used on a
BOSS stand-on, multi-purpose machine. The blade is
designed to hydraulically change its angle as needed
for snow removal. Using this product for purposes
other than its intended use could prove dangerous to
you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit
www.bossplow.com
for product safety and
operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine BOSS parts, or
additional information, contact an Authorized BOSS
Dealer or BOSS Technical Service (1-800-286-4155)
and have the model and serial numbers of your
product ready.
identifies the location of the
model and serial numbers on the product. Write the
numbers in the space provided.
g373159
Figure 1
1.
Model and serial number location
Date
Purchased
Model No.
Serial No.
Blade Crate
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(
), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
g000502
Figure 2
1.
Safety-alert symbol
This manual uses 2 words to highlight information.
Important
calls attention to special mechanical
information and
Note
emphasizes general information
worthy of special attention.
© 2022—BOSS Products
P.O. Box 787
Iron Mountain, MI 49801
2
Contact us at www.bossplow.com.
Printed in the USA
All Rights Reserved
