Boss Snowplow Snowrator SNR24001, Руководство пользователя, Страница: 22 / 48

Using the Fuel-Shutoff
Valve
Close the fuel-shutoff valve for transport, maintenance,
and storage (
Figure 25 ).
Ensure that the fuel-shutoff valve is open when
starting the engine.
g295392
Figure 25
1. Choke 2. Fuel-shutoff valve
Pushing the Machine by
Hand
The bypass valves allow you to push the machine by
hand without the engine running.
Important:
Always push the machine by hand.
Do not tow the machine, because hydraulic
damage may occur.
Important:
Do not start or operate the machine
with the bypass valves open. Damage to the
system may occur.
1. Open the bypass valves on the hydraulic pump
by turning them counterclockwise 1-1/2 turns
(
Figure 26 ).
Note:
Do not turn the valve more than 1-1/2
turns so that the valve comes out of the body,
causing fluid to run out.
g295618
Figure 26
1. Bypass valves
2. Push the machine to the desired location.
3. Close the bypass valves and torque them to 12
to 14 N∙m (110 to 130 in-lb).
Transporting the Machine
Use a heavy-duty trailer or truck to transport the
machine. Use a full-width ramp. Ensure that the trailer
or truck has all the necessary brakes, lighting, and
marking as required by law. Please carefully read all
the safety instructions. Knowing this information could
help you or bystanders avoid injury. Refer to your
local ordinances for trailer and tie-down requirements.
WARNING
Driving on the street or roadway without
turn signals, lights, reflective markings, or a
slow-moving-vehicle emblem is dangerous
and can lead to accidents, causing personal
injury.
Do not drive the machine on a public street
or roadway.
22