Boss Snowplow Snowrator SNR24001, Руководство пользователя

Страница: 19 / 48

g294503
Figure 21
1. Sprayer throttle
Spraying Tips
•
Do not overlap areas that you have previously
sprayed.
•
Watch for plugged nozzles. Replace all worn or
damaged nozzles.
•
You will obtain better results if the machine is
moving when you turn the sprayer on.
Using the Spray gun
Note:
Do not drive while spraying with the spray gun.
1. Drive to the location where you will be spraying.
2. Switch the sprayer pump on ( Figure 19 ).
3. Turn the spray gun valve to the O
PEN
position
( Figure 22 ).
g294504
Figure 22
1. Sprayer pump switch
4. Squeeze the handle on the spray gun to begin
spraying (
Figure 23 ).
Rotate the handle lock to continue spraying
without squeezing the handle.
g294505
Figure 23
1. Handle lock 2. Handle
5. When you are done spraying, turn the spray
gun valve to the C
LOSED
position and switch the
sprayer pump off.
Unclogging a Nozzle
If a nozzle becomes clogged while you are spraying,
clean the nozzle as follows:
1. Close the sprayer valve and shut off the sprayer
pump.
2. Stop the machine on a level surface, shut off the
engine, and disconnect the kill cord from the
operator presence sensor.
3. Remove the clogged nozzle and clean it using a
spray bottle of water and a toothbrush.
4. Install the nozzle.
Using the Information
Display
g294496
Figure 24
1. Button
19