background image

Safety

Improper use or maintenance by the operator or
owner can result in injury. To reduce the potential
for injury, comply with these safety instructions
and always pay attention to the safety-alert
symbol

, which means

Caution

,

Warning

, or

Danger

—personal safety instruction. Failure to

comply with the instruction may result in personal
injury or death.

Preparation

Read the

Owner’s Manual

before operating or

servicing the plow.

Always follow the vehicle manufacturer’s
recommendations relating to system installation.

Ensure that only trained personnel installs and
performs maintenance on the equipment and
hydraulic components.

Always wear appropriate personal protective
equipment when loading, unloading, and servicing
the plow. Wear substantial, slip-resistant footwear
and eye protection.

Operation

Use a 500 kg (1/2 ton) minimum lifting device to
move heavy plow components.

Never put any part of your body between the plow
and the vehicle.

When transporting the plow, ensure that it is
properly secured. Instructions are available at
www.bossplow.com.

When transporting the vehicle, position the plow
so as not to block your vision or headlights.

Do not change the blade position when traveling.

Do not exceed 16 km/h (10 mph) while
transporting.

Always lower the blade when the vehicle is not in
use.

Do not operate the machine while ill, tired, or
under the influence of alcohol or drugs.

Always follow the vehicle manufacturer’s
recommendations for proper parking procedures.

Overloading the plow could result in an accident
or damage. Never exceed the rated operating
capacity for the vehicle.

Ensure that you do not exceed the
gross-vehicle-weight rating (GAWR) at any
time.

Turn the vehicle and plow off before filling,
servicing, or cleaning it.

Do not climb into or ride on the plow.

Keep your hands, feet, and clothing away from
moving parts and mounting points.

Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.

Do not operate the plow within 8 m (25 ft) of
bystanders.

3

 

Содержание MSC23345













Отзывы: