Boss Snowplow MSC13625, Руководство пользователя

Страница: 13 / 28

Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Mounting the Snowplow
Note:
The vehicle must be running before starting
this procedure.
1. Activate the F
LOAT
feature on your plow
controller.
2. Line up the vehicle with the snowplow and drive
forward until the lower pin contacts the pin
receiver (
Figure 13 ).
g318519
Figure 13
1. Coupler tower 3. Wire harness
2. Lower pin 4. Pin receiver
3. Set the parking brake.
Note:
If your vehicle does not have a parking
brake, chock the wheels.
4. Turn the levers on the couplers to the A
TTACH
position ( Figure 14 ).
g038430
Figure 14
1. L
OCK
position 2. U
NLOCK
position
5. Remove the electrical-plug dust-covers and
connect the plow wire harness to the vehicle
wire harness (
Figure 13 ).
6. Activate the F
LOAT
feature on your plow
controller.
7. Using the coupler handle, push the coupler
tower upward until the coupler spring pins snap
in (
Figure 15 ).
g318517
Figure 15
1. Coupler handle
8. Ensure that both coupler spring pins have fully
engaged the coupler (
Figure 14 ).
Note:
Move the coupler tower until the spring
pins engage completely.
13