Boss Snowplow Drag Pro 180Z, Руководство пользователя

Страница: 16 / 32

Product Overview
g333428
Figure 34
1. Attachment pin 3. Hydraulic reservoir cap
2. Top link 4. Coupler switch
Controls
Become familiar with all the controls before you
operate the plow.
Coupler Switch
The coupler switch controls the movement of the
coupler tower to facilitate plow attachment and
removal. Press the switch up to raise the tower and
down to lower the tower.
Switching the Control Modes
This controller is equipped with two different software
modes that will enable or disable various functions
depending on which model plow is used. The
controller is factory set to use with the Drag Pro, and
can be configured for use with the Drag Pro 180Z
to include both 180 degree wing rotation and float
functions.
1. With the controller turned off, press and hold the
LOWER
button.
2. While still pressing the
LOWER
button, turn the
controller on.
Note:
The light, surrounding the raise and
lower buttons on the controller, will alternate
flashing red and green.
3. Release the
LOWER
button during the appropriate
colored flash for the desired setting.
•
Release the lower button during the red flash
to enable Drag Pro mode
•
Release the lower button during the green
flash to enable the Drag Pro 180Z mode.
Note:
The controller saves your setting until you
change it using the above procedure.
Controller
•
Raise button—raises the plow blade
•
Lower button—lowers the plow blade
•
Left Wing Out button—moves the left wing out
•
Right Wing Out button—moves the right wing out
•
Left Wing In button—moves the left wing in
•
Right Wing In button—moves the right wing in
g234473
Figure 35
1. Left Wing Out button 4. Right Wing In button
2. Left Wing In button 5. Right Wing Out button
3. Raise button 6. Lower button
Activating Float
To activate float mode, double tap or hold down the
lower button (
Figure 35 ) until the light, surrounding the
raise and lower button on the controller, turns red.
Activating Down Pressure
Triple tap or hold down the lower button until the
light, surrounding the raise and lower button on the
controller, turns orange.
Hydraulic Flow-Control Valve
The hydraulic flow-control valve adjusts the speed in
which the plow raises and lowers. Refer to
Adjusting
the Hydraulic Lowering Speed (page 24) .
Top Link
The top links adjust the plow angle of attack. Refer to
Adjusting the Angle of Attack (page 20) .
16