background image

 

218

Convenient functions for audio CD creation

 

Enabling playback on CD 

 

players (Finalize)

 

If you intend to play a audio CD that was written using the 
BR-1600CD’s CD-R/RW drive on a standard CD player, the 
audio CD must be finalized. Audio CD-R/RW discs can be 
finalized at any time to enable playback on this type of 
player.

 

1.

 

Insert the CD-R/RW disc to be finalized into the BR-
1600CD’s CD-R/RW drive. 

 

The drive’s access indicator will begin to flash. Wait until 
this indicator stops flashing and turns off before 
proceeding.

 

2.

 

Press [AUDIO CD WRITE/PLAY].

 

The Audio CD screen will appear.

 

fig.40-01d

 

3.

 

Press [F3] (FINALIZE).

 

The message “Finalize OK?” will appear.

 

fig.40-07d

 

4.

 

Press [ENTER/YES].

 

If you want to cancel finalization, press [EXIT/NO]. 

Finalization will begin and the state of progress will be 
displayed. When the message “Complete” appears and 
the track buttons begin to flash, the finalization is 
complete.

 

5.

 

Press [EXIT/NO] several times to return to the top 
screen.

 

6.

 

Press the CD-R/RW drive’s EJECT button to eject the 
disc.

What is finalizing?

In addition to the audio data itself, other 
information describing the position and time of this 
data is also written to audio CDs. This process is 
known as “Finalizing.” 

If you finalize:

When finalization has been carried out, you will be 
able to play your audio CD on a standard CD player. 
Note, however, that you will no longer be able to 
add songs to a finalized CD. 

Furthermore, the finalization of audio CDs 
containing only one short song is wasteful, since the 
remaining empty space on such discs can no longer 
be used. 

For this reason, you should aim to carry out 
finalizing of a CD-R disc only when it is nearly full 
of songs. 

If you don’t finalize:

It will not be possible to play your audio CD on a 
standard CD player until it has been finalized; 
however, you can keep adding songs to the disc 
until this process is carried out. Whenever you want 
to play your audio CD on a standard CD player, you 
should perform finalization.

• Once finalization has been started, it will not be 

possible to cancel this process.

• In certain cases, a period of several seconds will pass 

before the disc is actually ejected.

BR-1600_R_e.book 218 ページ 2007年12月6日 木曜日 午前9時52分

Содержание Digital Recording Studio BR-1600 CD

























































































































































































































































































































Отзывы: