Parking Brake Connection
Note: Never connect cable to the system while it is connected to the battery power, whenever the unit
is disconnected from the battery, the preset memory will be erased and the unit will go back to its
factory defaults.
1.To watch video the parking wire should be connected to break signal. 2 cables are connected to a
hands-free device (not included).
2. The GND of parking wire is connected with brake signal, while the GND of SWC wire is connected
with steering wheel.
3. The restriction of use SWC is the voltage between the adjacent buttons are above 0.2 V that can be
identified.
Parking brake wire
Note:
The parking wire is connected with brake signal; for safety, the programs can be seen on the
monitor after braking the car.
Connecting the reversing line to taillight on the car
03
