Boss Audio Systems BPS80, Руководство пользователя

Страница: 6 / 13

BPS80 Amplified Subwoofer User’s Manual - Page 6
5. Connect all line inputs and outputs (if
used) using high-quality cables. Connect
all speakers, following the diagrams in
this manual. Be sure to observe proper
polarity to avoid audio phase problems.
6. Insert fuse(s) into the battery fuse
7. Recheck all connections before
8. Set all level controls to minimum
powering up the subwoofer.
position, and set all crossover
controls/switches to the desired
frequency points.
9. Power up the head unit and the
10. Further fine tuning of the various
controls may be necessary to obtain best
subwoofer. Then set the volume control
on the head unit to about 3/4 volume,
and adjust the subwoofer’
controls to just below the level of
distortion.
results.
holder(s).
Do not mistake the input level control
for a volume control! It is designed
ONLY to match the output level of
your audio source to the input level
of your subwoofer.
Don’t misuse the level control!
Do not adjust this input level to
maximum unless your input level
in an input overload to the amplifier
in the subwoofer, and excessive
audio distortion. It can also cause
the protection circuit to engage.
requires it.
lgnoring these instructions will result