background image

6

7

BUTTON FUNCTION

1.Press the POWER button to turn the unit on.
2.Insert the CD, and then display shows CD sign, playing begins to 
start automatically. 
When the last track on disc playing finished, the disc track number 
will return to track one, and play again.
3.Press the(      )button to eject the CD disc from the slot; If the disc 
has not yet been taken away within 10 seconds, it will automatically 
be loaded into the slot again, but will not play.

INSERT/
EJECT
CD DISC

When short pressing:
The radio searches for each preset station.
When the field strength level is more than the threshold level of stop 
level, the radio is holding at preset  number  for few secretary with 
releasing mute, and than searches again.
In FM band,FM1,FM2 and FM3 is checked one at a time.
When long pressing(more than 1 secretary )
The radio searches from the current frequency and checks the signal 
strength, level until 1cycle search is finished. And then 6 strongest 
stations are preset to the corresponding preset number.
The AS operation is finished, the radio executes the Preset scan.

AS/PS
SEARCH

1)RADIO MODE.

-Frequency moves one step up/down when press T-UP/DOWN key 
 is pressed for less than 500ms.
-SEEK MODE is activated as below when T-UP/DOWN key is pressed 
 for longer than500ms.
*Establishing SEEK MODE from the MENU. 

-SEEK2:SEEK is activated after key is released.

2)CDP MODE.

-TRACK UP/DOWN is activated when key is pressed for less than 
 500ms .Track returns to the beginning of the song when play has 
 been on for longer than 3 sec.
-SEARCH FF/FR is activated when T-UP/DN key is pressed for longer 
 than 500ms. Search function is  activated up to the first  track at 
 0min 0sec,then resumes play.

-SEEK1:SEEk is activated right away when key is pressed for longer 
 than 500ms.

T-UP/
DOWN

When pressed short, It is used as the selection of each function.
When a mode is selected, the sound source switching is controlled 
in E.V.R. And relative port control is also implemented. 
>RADIO >CDP >TAP >AUX
When a CDP is existed inside, S-CDP of individual segment is 
turned on.

MODE

When system is on, by pressing this key, the radio system goes into 
power off mode. All information about its current setting, and 
restores the information when switched on again. The system 
comes to ON by pressing any key.

POWER 
ON/OFF

1

2

3

4

2

EJECT BUTTON
push down to eject the cassette tape.

3

CASSETTE COMPARTMENT
Insert a tape into the cassette compartment. 
The unit will automatically switch from '

TAPE' will be shown on display.

4

FAST FORWARD/REWIND/PROGRAM BUTTON
Fast forward/rewind: Press the button with the double arrows pointing the 
same direction as the direction indicator in the LCD to fast forward. 
Press the other button in the opposite direction to rewind.
Program: Push down both buttons together to play the other side of the tape.        

1

RESET BUTTON

USA

EUR

Radio frequency area  option:(see the pict re )

u

GETTING STARTED

Содержание 814CA











Отзывы: