Page 4
Page 7
2) Press the INT button to sample the first 10 seconds part of each track, and the
INT ON will be visible on the LCD display.
In the process of INT, pressINT button again to stop sampling and to continue
playing the current track, and the LCD will display INT OFF.
3) Press the RPT button once to play the current track repeatedly, and the RPT
ONE will be visible on the LCD display.
During MP3/WMA disc or USB mode, press the RPT button twice
continuously to play the current folder repeatedly, and the RPT ABM will be
visible on the LCD display.
In the process of RPT, press RPT button again to stop playing repeatedly
mode and the LCD will display RPT OFF.
4) Press the RDM button to play all tracks on disc in random order, and the
RDM ON will be visible on the LCD display.
In the process of RDM, press RDM button again to stop playing in random
order and the LCD will display RDM OFF.
5) Press the -10 and +10button to move up and down10 tracks at a time.
When the remained total tracks is lack of 10, the both buttons are inactively.
9. BAND AND LOC BUTTON
In radio mode,press the BND button briefly to select the radio broadcasting
band you would like to hear. The AM/FM band is toggled cyclically through the
tuning bands:
->FM 1-> FM 2 -> FM 3 -> AM1->AM 2 ->.
Press and hold the BND button to select LOCAL/DX mode.
Note: This button is only for FM reception. In AM mode, LOC is void.
10. MODE BUTTON
Press the MODE button to change among tuner (radio), disc (when a disc is
loaded), USB (when an USB stick is inserted) and AUX mode.
11. EJECT KEY
In the power on state, the loaded disc can be ejected by pressing the EJ key.
12. LOUDNESS BUTTON
When press briefly, the LOUD mode is turned on, its to enhance the bass sound
effect when the volume level is low. Press again to cancel the loudness effect.
13. AS/PS BUTTON (Auto-storage /Preset scan)
During radio mode:
1) when press and hold for more than 1 second, the radio searches from the
current frequency and checks the signal strength level until 6 station are
found. And then the 6 stations frequency are preset to the corresponding
preset memory numbered bank. The auto-storage operation is implemented
in the each selected band. When the auto-storage operation is finished, the
radio execute the Preset Scan.
INSTALLATION METHOD
This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal mounting
sleeve into the car as per the diagram illustrated below.
METAL
SUPPORT STRAP
To raise the anti-skip capability of the unit,
please ensure the metal support strap is
connected firmly to the car chassis.
To properly fix the metal mounting
sleeve, bend the tabs of the sleeve
against the DASH BOARD with a
screwdriver.
注意事項
DASHBOARD
METAL MOUNTING SLEEVE
UNIT CHASSIS
PLASTIC TRIM RING
FRONT PANEL
To remove the CD player out of the mounting sleeve,
insert the two supplied keys into the left and right side
slots of the chassis at the same time.
NOTE
Before installing and operating
the CD player, remove the metal
mounting sleeve illustrated by
the arrows.
Remove the two screws that protect
the CD player during transportation
before operating the player.
To attach the removable faceplate, insert the
right side of the faceplate into the right of the
CD player chassis first. Then push the left side
of the faceplate into the chassis until you hear
it “click”.
Содержание 658UA
Страница 1: ......
