OPERATION
5
8. CLK
9. SD CARD SLOT
11.FF( ) &12.FB( )
In the radio mode, long press the FF( ) or FB( ) button for more than 2 seconds, the unit will
search the next or previous frequency step by step.
Short press the FF( ) or FB( ) button, the automatic search will start, it will search upward or
downward for the strong signal radio station within the cuttent band. The auto searching will stop
until find a station.
13.BND/AMS
T
In the USB or SD card mode, press the volume knob to enter the EQ function that the audio
At the radio status,press and hold the VOL button to enter switch state of the US(USA) and EU
(EUROPE) frequency,then rotate the VOL knob to select US frequency or EU frequency,after
selecting US or EU frequency,the system will switch to the selected frequency 3 seconds later.
In the radio mode, rotate the volume knob to increase or decrese the volume level of the sound
In radio mode,short press the BND/AMS button repeatedly to select the one of the radio band : FM 1,
FM 2,FM 3,AM1,AM2 in a cycle sequence. When you select a band, the word F1
、
F2
、
F3 for FM band,
and A1
、
A2 for AM band will be shown on the LCD display.
preset station in each band.
AMS button to scan each
Press the BND/AMS
check
During USB or SD playback, short press the BND/AMS button to enter track search mode, then rotate
the VOL knob to track forward or backward; if no any operation in 5 seconds,it will play the current track.
When the 6 strongest stations will be stored into
Loud
Loc/DX
Stereo
Vol
Press the button to flip down the front panel. Remove the front panel to gain access to the SD
card slot. Insert an SD card, then attach and close the front panel. Switch to SD mode when you
wish to begin SD card playback.
Press the CLK button once to display the real time, With time appearing on the display.Press and hold
CLK button for more than 2 seconds until the time flashes. You can adjust the HOUR and MINUTE by
pressing the button and button respectively and press the CLK button to switch the HOUR and
MINUTE.
