Boss Audio Systems 620CA, Руководство пользователя

Страница: 8 / 15

16) SOURCE BUTTON (SOURCE)
Press this button to select Radio and CD modes.
The available selections depends on version:
Radio CD Player
Radio > CD
Press this button to remove the control panel.
6. BASIC OPERATIONS
1) PANEL RELEASE BUTTON (REL)
12) POWER ON/OFF BUTTON
5) DISPLAY BUTTON (DISP)
Press this button to turn on or off the power.
Press this button briefly, the LCD will display the clock for about 2 seconds, then return to previous
display mode.
Clock Adjustment
Under clock display mode, press DISP button until the LCD flashes, press Tuning Up Button to adjust
hour and Tuning Down Button to adjust minute.
7
The RESET button is located on the main unit (as shown on the diagram). To press it vertically with a ballpoint pen
or metal object will activate it. The reset button is to be activated for the following reasons:
RESET BUTTON
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
Note: If the unit cannot function normally after reseting please use a cotton swab soaked in isopropyl
alcohol to clean the socket on the back of the control panel.
,
18) FRONT AUXILIARY INPUT JACK
3. 5mm Audi o In Cabl e (not in cluded)
Right Audi o
Left Audi o
Gr ound
1
2
3
AUX IN JACK IN PANEL
Connect the external signal to AUX in jack
located at the front of the panel , then press
SOURCE button to select Aux mode. Press
SOURCE button again to cancel Aux mode and
return to previous mode.