ENG-7
ENG-8
CD Operation
You can play commercially available audio CDs including CD-R and CD-RW.
Note:
·
Even if this portable radio-CD player is able to read CD-R and CD-RW discs, in addition to conventional
compact discs, it is not possible to offer a 100% guarantee that all CD-R/RW discs can be read; playback
depends on the quality and condition of the blank discs that you use, among other things. A playback
failure does not necessarily indicate that the unit is malfunctioning.
·
You cannot play CDs encoded with copyright protection technologies.
Play a CD
1. Adjust the
Function Selector
to
CD
.
2. To open the CD door, raise it by the corner marked OPEN/CLOSE.
3. Insert a CD with the printed side facing up.
·
The total number of tracks in the disc will display.
·
If no disc or CD door is not closed, display shows “- -”.
4. To start playback, press the
Play/Pause
button.
5. To pause/resume play, press the
Play/Pause
button.
6. To stop play, press the
Stop
button.
7. To skip a track, press the
Back
or
Next
buttons.
8. To search within a track, press and hold the
Back
or
Next
buttons.
Release the button to resume normal play.
Play options
Adjust volume level
1. During play, turn
Volume Control
to increase/decrease the volume level.
Select play modes
1. Press the
Repeat
button repeatedly to select a play mode:
·
repeat: repeat the single track.
·
repeat all: repeat the whole disc.
2. To return to normal play, press the
Repeat
button repeatedly until play mode icons are no longer
displayed.
Program play sequence
You may store up to 20 tracks in desired sequence. Be sure to press the Stop button before use to ensure
no prior program has been set.
1. In stop mode, press the
Program
button to activate
programming.
·
“
PROGRAM”
and “
00
” indicator will flash on the display.
2. Press the
Back
or
Next
buttons to select your desired track number.
3. Press the
Program
button to store the desired track number.
4. Repeat steps 2-3 to select additional tracks into program memory.
·
When the memory is full, “
PROGRAM
” and “- -” will flash on the display.
5.
To play your program, press the
Play/Pause
button in stop mode.
·
The “
PROGRAM
” indicator will flash.
6.
To review the program, pres
s
the
Program
button to
display your stored tracks in stop mode.
7.
To erase a program, press the
Stop
button in stop mode or by
opening the CD door.
·
The “
PROGRAM
” indicator will disappear.
Total track
PROGRAM
PROGRAM
REPEAT
REPEAT ALL
REPEAT 1
à
REPEAT ALL
à
NORMAL PLAYBACK
Maintenance
Clean the cabinet
Use a soft slightly moistened with a mild detergent solution. Do not use a solution containing alcohol,
spirits, ammonia or abrasives.
Clean discs
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out.
Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray
intended for analogue records.
Clean the disc lens
After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good play quality, clean the
disc lens with camera lens brush or any commercially available cleaners. Follow the instructions supplied
with cleaner.
