c. If you wish to re-install the cover, we recommend cutting a large hole into the cover to
ensure proper ventilation.
d. Remove all tools and debris from the engine bay and close the hood.
NOW DRIVE WITH CONFIDENCE WITH BOSLLA LED!
BOSLLA LED Decoder Installation(If Needed)
If your vehicle needs the additional BOSLLA LED Decoder, please follow the steps
below to complete the installation.
a. Connect the decoder between the BOSLLA LED Kits and the factory power plug.
b. Complete Step 3.
c. Enjoy your new LED lights.
9
Decoder and Notification
If the LED lights up but flickers, strobes, “error code” on dashboard, or radio interference
etc., then you are experiencing a rare voltage regulation issue which can be solved by
adding a DECODER( capacitor or resistor) to setup, please contact customer service at
with your vehicle make/model/year to get a link to buy the capacitor
or resistor.
Installation steps of the decoder:
10
Resistor
Decoder
Capacitor Decoder
BOSLLA
LED Product
Car Factory
Plug
BOSLLA
LED Product
Car Factory
Plug
