Boser KVM-9000, Руководство пользователя, Страница: 14 / 24

8
3.2 Hardware Installation
1. Find a convenient place to put your KVM-9000. When mounting to
a rack, attach the included brackets to the sides of the KVM-9000.
Take note of the length of your cables so that your computers
keyboard, mouse and monitor are distanced properly.
2. Now the PC connections can be made with the monitor (VGA)
connections first. Connect a VGA cable (15-pin HDDB male/ male)
with the male side to both of the PC and the rear panel of the KVM
switch to the connector labeled VGA. Repeat this for all PCs.
3. Connect the first computer’s mouse cable to the KVM-9000. If
using a PS/2 cable, connect one end to the PS/2 mouse port on
the computer, while the other end is connected to the PC1 PS/2
mouse port on the back of KVM-9000.