Boser HS-6253, Руководство пользователя

Страница: 18 / 80

12
3.7.2 Removing DiskOnChip

Modules
When removing a DiskOnChip

module from its socket, please take
note of the following:
1. Loosen the contact of the module from its socket using a
screwdriver.
2. Insert the screwdriver’s flat head into a gap on either end of the
socket. Do not insert the screwdriver head on either side where
the pins are located. Doing so might damage the pins in the
process.
3. Slowly lift the screwdriver handle upwards. This will disengage
the module from its socket.
NOTE: If you encounter difficulty removing your DiskOnChip

module,
please consult a qualified technician or engineer to remove it for
you.
3.8 VGA Controller
The HS-6253 provides three connection methods of a VGA device.
VGA1 offers a single standard CRT connector (DB15) while LCD1 is
the 50-pin panel connector and LCD2 is the LVDS interface connector
onboard reserved for flat panel installation.
VGA1: 15-pin CRT Connector (DB15)
PIN Description PIN Description
1 Red 2 Green
3 Blue 4 N/C
5 GND 6 GND
7 GND 8 GND
9 N/C 10 GND
11 N/C 12 SDA2
13 HSYNC 14 VSYNC
15 SCL2
1
6
10
11
5 15