manualshive.com logo in svg

BOSER Technology HS-2616, Руководство пользователя

Поделиться
Скачать
BOSER Technology HS-2616 Скачать руководство пользователя страница 7

 

1

Chapter 1 

General Description 

 

HS-2616 HS-2616M 

The HS-2616 is an Intel® 852GME GMCH and HS-2616M is an Intel® 
852GM GMCH chipset-based board designed. The HS-2616/ 
HS-2616M is ideal all-in-one embedded engine board. Additional 
features include an enhanced I/O with CF, CRT/LVDS, dual LAN, 
audio, 4 COM, and USB2.0 interfaces. 

Its onboard ATA/33/66/100 to IDE drive interface architecture allows 
the HS-2616/HS-2616M to support data transfers of 33, 66 or 
100MB/sec. to one IDE drive connection. The HS-2616 supports Intel® 
Pentium® M/Celeron® M processor, and HS-2616M supports ULV 
Intel® Celeron® M processor 600MHz/512K.  

The Intel® 852GM with 8MB shared main memory supporting CRT 
display up to 1600 x 1200. It also supports 18-bit single/dual-channel 
LVDS interface. 

System memory is also sufficient with the one SO-DDR socket that can 
support up to 1GB. 

Additional onboard connectors include four USB2.0 ports providing 
faster data transmission. And two external RJ-45 connectors for 
10/100 Based Ethernet use. 

Содержание HS-2616





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды