Bose Wave Radio/CD, Руководство пользователя

Страница: 20 / 30

20
Operating Your Wave
®
Radio/CD
Setting the alarms
Note: You can set alarms with the Wave Radio/CD on or off.
Function
To enter alarm setup mode - Press and release Alarm Setup . The system is now in alarm
setup mode. ALARM 1 flashes for 10 seconds.
To select which alarm to set - While ALARM 1 is flashing, set alarm time, volume, and alarm
sound (tone , radio, or CD), for Alarm 1. Press Alarm Setup again until ALARM 2 is flashing.
While it flashes for 10 seconds, begin to set Alarm 2.
To set the alarm time - While the selected alarm is flashing, press the Time or to set the
alarm time. The selected alarm flashes for 10 seconds.
To set the alarm source
- While the selected alarm is flashing, press FM , AM , or CD to select
and display that source. The tone is no longer selected.
• To reset to tone, press the source currently selected (
FM , AM , or CD ), which deselects it.
• When no source is displayed, the alarm is set to tone .
• Setting FM or AM alarm, the station last used for this alarm is shown. Or, use
Presets or
Track⁄Tune or to select a station.
• Setting CD alarm, track 1 is shown. Or, use Track⁄Tune or to select a specific track or time
location for the alarm. Press CD Mode to select RANDOM or TRACK REPEAT . The CD
plays, repeating as needed, until the alarm shuts off.
• To set radio or CD followed by tone , select radio or CD alarm, then press
CD Stop
■
.
AUX is not available as an alarm source.
To set the alarm volume - While the selected alarm is flashing, press Volume
▲
or
▼
to set
the alarm volume, from 10 to 99 . The selected alarm flashes for 10 seconds.
To test the alarm volume - While the selected alarm is flashing, hold down Alarm Setup and
press Volume
▲
or
▼
to hear the volume setting, as demonstrated by the tone alarm only.
To adjust snooze time - The system is set for a standard 10-minute snooze time (the number
of minutes you can delay the alarm). While the selected alarm is flashing, hold down Sleep⁄Snooze
and press the Time or to adjust the snooze time (from 1 to 30 minutes) for that alarm. The
number of minutes and Sn appear on the display to confirm your selected snooze time. You can
set a different snooze time for each alarm.
To exit from alarm setup - To leave alarm setup mode, wait 10 seconds for it to disengage.
Or you can press AUX once or Alarm Setup a few times until there is no ALARM 1 or ALARM 2
flashing.
To check the alarm setting - To display the alarm setting for 10 seconds, press and release
Alarm Setup . Press again to display one alarm setup and repeat to display the other alarm setup.
Alarm
Setup
FM AM
Track/Tune
AUX
Reading the alarm setup displays
Figure 13
Examples of alarm setup
displays
Time Time
Alarm
Setup
Alarm
Setup
Alarm
Setup
Sleep/Snooze
Time Time
CD Play
CD Stop
ALARM 1 flashes. You can begin by setting the time.
Pressing FM selects it as the source for ALARM 1 .
ALARM 2 flashes. You can begin by setting the time.
Pressing CD selects it as the source for ALARM 2 .
1
2
Alarm
Setup
4
Alarm
Setup
3
CD Play
FM
Presets
Volume
AUX
On/Off
Alarm
Setup
4 5 6
Track/Tune
Sleep/Snooze
Wave Radio/CD
Alarm 1
On/Off Alarm 2
On/Off
1 2 3
FM AM
Stop
Alarm
CD Play CD Mode CD Stop
Time Time
Control panel
CD Mode
Alarm
Setup