Bose SoundTouch 130, Руководство пользователя

Страница: 25 / 124

English - 25
Using the System
Program the remote to control your source
If your source does not support CEC, you can program the universal remote to
control your source, such as a TV, cable/satellite box, DVD or Blu-ray Disc
™
player,
game system or DVR, by entering the code for your source’s brand. There may be
several codes for your source. You may need to perform this procedure multiple
times to locate the correct code.
Locate your source’s code
1. Power on your source.
2. Locate the code for your source’s brand in the Universal Remote Device
Codes book (provided).
Enter your source’s code
1.
On the remote control, press and hold the appropriate source button until all
six source buttons glow, then release.
For example, to program your TV, press and hold
until all six source
buttons glow, then release.
The appropriate source button continues to glow.
2. On the number keypad, enter the code for your source’s brand and press + on
the volume button.
Test your source’s code
1.
Test your source for basic functions. Follow the instructions for your source:
•
TV : press the channel buttons. Press . The settings menu appears.
Press and to navigate.
• Cable/satellite box : press . The programming guide appears.
Press and to navigate.
• DVD or Blu-ray Disc
™
player : press . The settings menu appears.
Press and to navigate.
•
Game system
: press and to navigate through your menu.
2. Based on your source’s response to basic functions:
•
Remote responds accurately: press to exit programming and
save your settings.
• Remote does not respond or does not respond accurately:
-
If your source button glows:
press
+
on the volume button to move to
the next code. Repeat steps 1-2 in “Test your source’s code”. You may
need to repeat this procedure 30 or more times. If all six buttons blink
three times, you have cycled through all codes for your source.
-
If your source button is off: your remote exited programming mode.
Repeat steps 1-2 in “Enter your source’s code” and steps 1-2 in “Test
your source’s code”.
Note: Your source may not be compatible with IR universal remote controls. Refer
to your source’s owner’s guide for more information.