Bose S1 Pro, Руководство пользователя

Страница: 7 / 192

Owner’s Guide - 7
Operating Information
Connections and Controls
The Bose
®
S1 Pro control panel provides the necessary connectors, controls and indicators for operation.
Use Channel 1 and 2 inputs for microphones and musical instruments. Integrated ToneMatch® signal processing allows microphones
and instruments to sound their best. Use Channel 3 for
Bluetooth ® connectivity and line-level inputs.
q
SIGNAL/CLIP INDICATOR – Displays the input signal status in color.
• Green: Signal present
• Red: Signal clipping
Note: Reduce the corresponding volume control to prevent steady red operation.
w
VOLUME CONTROL – Adjust the volume of your microphone, instrument or audio source.
e
TREBLE CONTROL – Adjust the high-frequency balance of your microphone or instrument.
r
BASS CONTROL – Adjust the low-frequency balance of your microphone or instrument.
t
REVERB CONTROL – Adjust the amount of reverb applied to your microphone or instrument.
y
TONEMATCH SWITCH
– Move the switch to the or position to enable the ToneMatch preset.
u
SIGNAL INPUT – Analog input for connecting microphone (XLR) and instrument (TS unbalanced) cables.
i
AUX INPUT
– Use a 3.5 mm TRS cable to connect a line-level audio source.
Note:
This input is muted when Bluetooth connectivity
is active.
o
LINE OUTPUT – Use a ¼" TRS cable to connect the line-level output to the Aux Input of a second S1 Pro, to create a mono two-
loudspeaker setup. Note: Line Out is post mix.
a
SERVICE PORT – Micro-USB connector for Bose service use only.
s
BLUETOOTH PAIR BUTTON – Used to set up pairing with Bluetooth -capable devices, such as mobile phones, tablets, and laptops
(see “ Bluetooth Pairing” on page 9).
SIGNAL SIGNAL SIGNAL
1 2 3
q
i
s
a
o
w
e
r
t
y
u