Bose RoomMatch Utility RMU105 Скачать руководство пользователя страница 11

Страница: 11 / 14

14 English

Installation and Safety Guidelines

Installation

pro.Bose.com

Mounting the RMU108 Loudspeaker on a Speaker Stand

The RMU108 is the only RMU loudspeaker that has two M8 threaded inserts on one end for mounting an

industry-standard stand-mount adapter. This allows you to vertically mount the RMU108 on a speaker

stand, such as the Bose SS10 model. Other stands have not been tested and may create a tipping hazard.

Using the T3 square drive (included), remove the two plastic inserts on the end panel of the RMU108

loudspeaker.

Note:

You may need to remove the center insert to allow the adapter to fit properly.

Attach the bracket to the loudspeaker using M8 screws.

Mount the loudspeaker on the stand and tighten the bracket.

Figure 12. RMU108 speaker stand adapter threaded inserts

Stand adapter inserts

Recommended Amplifier

Selecting the proper amplifier size for a given loudspeaker requires analysis of the transducer long-term (or RMS) power rating, dynamic

range of the input-source material (crest factor), desired sound pressure levels, and other factors. As a general guideline, the following

table provides recommended power amplifier ranges for each RoomMatch

Utility model:

RoomMatch Utility Model Nominal Impedance

Required Channels

Amp Power Rating

RMU208

8 ohms

300 – 1200 W

RMU206

8 ohms

250 – 1000 W

RMU108

8 ohms

200 – 800 W

RMU105

8 ohms

100 – 400 W

CAUTION:

Failure to follow these guidelines may result in damage to the loudspeaker.

The Bose

PowerMatch

configurable power amplifiers offer optimal amplification and DSP for RoomMatch Utility loudspeakers.

Please refer to the specifications listed on the

pro.bose.com

website for PowerMatch amplifiers and compare with the table above to

determine which PowerMatch model is best for your particular RoomMatch Utility system design.

Содержание RoomMatch Utility RMU105














Результаты поиска

Содержание RoomMatch Utility RMU105

Отзывы:

Бренды по названию

Популярные бренды

Bose RoomMatch Utility RMU105, Инструкция по установке и техника безопасности

Результаты поиска

Содержание RoomMatch Utility RMU105

Отзывы:

Бренды по названию

Популярные бренды